Jacketed ball plug gate globe check valve-Jacketed valve manufacturer

contact us

SHANGHAI HUIXUAN VALVE

Mobile:+86-17717520739
Wechat:17717520739
Email:info@shxvalve.com

Address: NO.720, Suide Road, Jiading District,Shanghai, China.
 


Thermal Hot Oil Jacketed Ball Valve

Model:

  • Port size:DN15xDN 40~DN150xDN250
  • Pressure:PN16~40 CLASS 150/300LB
  • Medium:Thermal Hot Oil
  • Temperature :20~450℃
  • Body material:WCB CF8 CF3 CF8M CF3M or others
  • Description:
  • Thermal Hot Oil Jacketed Ball Valve description

    Thermal Hot Oil Jacketed Ball Valve is specially used for Thermal Hot Oil medium to sustain process media temperature during process to keep Thermal Hot Oil at a lower viscosity to operate valve smoothly. Thermal Hot Oil Jacketed Ball Valve is widely used in High Viscous Process Media,Thermal Hot Oil Jacketed process application and other anti-crystallization and heating insulation industry system.

    Thermal Hot Oil Jacketed Ball Valve is Fully Jacketed Ball Valve design. The jacket covers the body from one flange to the other flange. The body of Bitumen Asphalt Pitch Jacketed Ball Valve is modified by adding oversize flanges. As example: 2" x 3" Bitumen Asphalt Pitch Jacketed Ball Valve has the nominal bore of 2" (DN 50) and the flange size is 3"(DN 80). It allows enough space for bolting clearance.

    We are Thermal Hot Oil Jacketed Ball Valve manufacturer in size starts from DN15 x DN 40 (1/2″ X 1-1/2″) to DN150 x DN250 (6″ x10″).
    The Jackets assure consistent valve Heating or Cooling of the process media to prevent crystallization or seizing of flow media. The Thermal Hot Oil Jacketed Ball Valve with very well design to help the high temperature steam or oil flow over the valve ball & body parts to keep the media liquid. 

    THERMAL HOT OIL JACKETED BALL VALVE OPERATION: Jacketed Ball Valves are generally supplied with manual hand lever or gear unit operated, depending on valve size.we also offering Ball Valves with either Pneumatic or Electrical actuator operated for automation.

    THERMAL HOT OIL JACKETED BALL VALVE BODY MATERIAL: Cast Carbon Steel (WCB), Cast Stainless Steel (SS304-316-304L-316L,CF8/CF8M/CF3/CF3M), Low Temperature Carbon Steel (LC1/LCB/LCC), Duplex Steel (D2205), Super Duplex Steel (D2207), Hastelloy (HC-C22/HC276), Alloy 20 (CN7M) etc.

  • Thermal Hot Oil Jacketed Ball Valve Structure

    Jacketed Ball Valve structure
  • How to choose Thermal Hot Oil Jacketed Ball Valve?

    1 About the ball valve working condition
    What structure do you want to use? -One piece,two pieces or wafer short length type.
    What is the medium of pipeline?
    Medium through pipeline working pressure ?
    Medium through pipeline working temperature?
    Pipeline connection size?
     
    2 About the jacket working condition
    What is the medium through Jacket, Steam or hot oil?
    Medium through jacket working pressure ?
    Medium through jacket working temperature
    Jacket end connection form (thread -BSP/ NPT Female or flange connection)?
    Jacket coupling size?  NPS1/2’’ is ok?
     
    3 Structure and material for the whole set of Thermal Hot Oil Jacketed Ball Valve
     The Thermal Hot Oil Jacketed Ball Valve is full jacket or partial half jacket design?
     what material do you choose for valve and jacket?
inquiry us

INQUIRY US

微信扫一扫

添加我为好友了解更多